Have you ever ever needed to repurpose or use a component at the farm to boost pigs in a special section than the only for which it used to be designed? Or have you ever needed to undertake a special feeding device than the only in the beginning designed for that room or manufacturing section? For sure, for lots of readers, the solution is sure.
The most typical case is converting the feeding device: with automated liquid feed control, many farmers have changed dry (advert libitum) feeding with rationed liquid feeding.
On uncommon events, as used to be the case right here, the other conversion has been made: from liquid to dry feed.
On this case, the farmer determined to make use of amenities up to now used for completing for the overall expansion section of the alternative gilts.
Since he didn’t need to use liquid feed, however somewhat dry, he devised this quite simple dry feeding device, which permits the animals to be fed a semi-ad libitum ration.
A big PVC pipe used to be positioned and mounted over the present rainy feeder. The ground section used to be raised prime sufficient off the ground of the feeder in order that the pigs may just get right of entry to the feed in it and the highest section used to be hooked up to the road that brings the feed from the silo.
The tube can include a definite quantity of feed, which the farmer is aware of. Within the morning, the feed supply device begins up and fills the entire “tubes”. At a definite time of the day, the device shuts down and the pigs proceed to devour till the entire contents of the tube are ate up.
We will name the program “semi-ad libitum” or “rationed advert libitum”, for the reason that animals best have feed to be had for a definite selection of hours in step with day.